欢迎:嵊州市力博锻压机械有限公司

首页 > 产品中心 > LBFP系列热模锻压力机 > LBFP-1000系列热模锻压力机

  • LBFP-1000系列热模锻压力机
LBFP-1000系列热模锻压力机

LBFP-1000系列热模锻压力机

产品特点:

滑块行程次数达50-100次/分钟,工作速度快,模具与工件接触时间短,模具温度低,模具寿命高;
飞轮转动惯量大,输出能量高,特别适合各种零件的热锻以及挤压工艺。LBGP型机床采用二级传动结构,增加一组齿轮传动,与LBFP型机床相比输出能量更高;
机身为焊接组合式机身,并采用高强度拉杆液压预紧,拆卸、运输方便,整体刚度好,锻件精度高。LBGP型机床台面加宽,提高了用户生产工艺的适应性;
宽体双点整体连杆以及加长导轨设计,抗偏载能力强,可多工位设置;
具备侧窗口,可横向送料,结合步进式机械手实现多工位自动化锻造,锻造自动化程度高;
采用四角八面导轨,抗偏载能力强,导向精度高,滑块运行稳定性好;
封闭高度采取滑块内偏心销调整,稳定可靠;
浮动镶块式摩擦块设计的离合器、制动器,结构简单可靠,维修方便;并采取齿导向,制动器、离合器动作精度高,制动离合噪音小,摩擦块寿命更高;制动器具备高效散热系统,制动器温升小,可实现高速单次运转;
控制系统集成气压监控、轴温监控、润滑监控、故障显示、偏心轴转速角度监控等,自动化程度高;配备触摸屏,可灵活调整各项参数。


The stroke times of sliding block are 50-100 times / min, the working speed is fast, the contact time between die and workpiece is short, the temperature of die is low, and the life of die is high;

The flywheel has large moment of inertia and high output energy, which is especially suitable for hot forging and extrusion process of various parts. Lbgp machine tool adopts two-stage transmission structure, adding a set of gear transmission, which has higher output energy than lbfp machine tool;

The fuselage is a welded combined fuselage, and adopts high-strength pull rod hydraulic preloading, which is convenient for disassembly and transportation, with good overall rigidity and high forging accuracy. The table of lbgp machine is widened, which improves the adaptability of production technology;

Wide body double point integral connecting rod and extended guide rail design, strong anti eccentric load capacity, can be set in multiple stations;

It has side window, can feed material horizontally, and can realize multi position automatic forging with stepping manipulator, with high forging automation degree;

It adopts four corners and eight sides guide rail, which has strong anti bias load capacity, high guide precision and good running stability of slide;

The closing height is adjusted by the eccentric pin in the slider, which is stable and reliable;

The clutch and brake designed with floating insert type friction block have simple and reliable structure and convenient maintenance, and adopt tooth guide, with high action precision of brake and clutch, low brake clutch noise and longer service life of friction block; the brake has efficient heat dissipation system and small temperature rise of brake, which can realize high-speed single operation;

The control system integrates air pressure monitoring, shaft temperature monitoring, lubrication monitoring, fault display, eccentric shaft speed angle monitoring, etc., with high degree of automation; equipped with touch screen, it can flexibly adjust various parameters.


Scan the qr codeClose
the qr code